Deep Pour Epoxy

Local Pickup in Kula, Maui (by True Value Hardware store) or Maui Delivery ($25) only

Features:

* 3:1 Mixing ratio

* Up to 1″ pours

* Excellent air release

* No VOC’s

* 100% solids

$565.00

Category Tags , , , , , , , , , , , , , ,

*  NO SHIPPING – MAUI LOCAL DELIVERY ONLY UPON REQUEST – LOCAL PICK-UP RECOMMENDED (Kula) * MAUI ONLY*

Alternatively, you can reach us directly at 808.866.4661 – text or call! 🙂 

MAS Deep Pour Epoxy Resin System is the best epoxy for deep pour. It features a 100% solid, two-component, three to one by volume mix ratio formulated for deep pour casting, encapsulating and molding applications. It is a slow cure epoxy resin which will cure within 24-36 hours at 70 degrees F creating a clear, glass like finish that resists scratching and yellowing with an extended gel time to minimize exotherm and improved air release. If you are creating an ocean or river table Mas Deep Pour is the original and best deep pour epoxy resin!
PLEASE NOTE: This is an advanced deep pour epoxy resin system. DO NOT use Deep Pour resin in working temperatures above 75°F.
Please take into consideration the volume of epoxy you pour into a void. Pouring too much epoxy into a large area may result in shrinking, yellowing or cracking. Keeping the work area cool by adding a fan can help reduce the risk of the epoxy overheating.
Working Conditions: 

For best results, all materials and working conditions should be maintained at a constant 60°F-75°F. Epoxy is a temperature sensitive material. When cool, it’s thicker and sets slower. When warm, it’s thinner and sets faster. Working in a shop or with material above 75°F, Deep Pour may set too quickly and exotherm (become too hot) which could cause it to yellow, distort, shrink or crack.

Maximum Casting Thickness: 

Max casting thickness can vary depending on a number of factors including shop temp, material temp, mixing quantity, mold material, project dimensions, etc. Larger slabs should be poured thinner than smaller castings to minimize exotherm. Every project is unique, but as a general guideline do not exceed 0.5” casting thickness for a full mixed 1.3 gallon kit, or 1” for a half mixed kit. Step pour multiple layers for thicker castings.

For additional info and details on this product, visit https://masepoxies.com/product/deep-pour-epoxy

 

    Additional information

    Size

    1.3 GAL Kit, 1.3 QUART Kit, 4 GAL Kit

    Kama'aina?

    This one is for you, Maui residents!

    Get 10% off with the coupon code below!

    KAMAAINA10

    Related products

    You may also like…